ARP Broadcasts

In this article we will discuss ARP Broadcasts, will make brief discussion on Host Forwarding Decision, In last article we discuss about Host Forwarding Decision.

The sending device will search its ARP table for a destination IPv4 address and a corresponding MAC address.

  • If the packet’s destination IPv4 address is on the same network as the source IPv4 address, the device will search the ARP table for the destination IPv4 address.
  • If the destination IPv4 address is on a different network than the source IPv4 address, the device will search the ARP table for the IPv4 address of the default gateway.

In both cases, the search is for an IPv4 address and a corresponding MAC address for the device.

As a broadcast frame, an ARP request is received and processed by every device on the local network. On a typical business network, these broadcasts would probably have minimal impact on network performance. However, if a large number of devices were to be powered up and all start accessing network services at the same time, there could be some reduction in performance for a short period of time, as shown in the figure. After the devices send out the initial ARP broadcasts and have learned the necessary MAC addresses, any impact on the network will be minimized.

Add a Comment

Your email address will not be published. Required fields are marked *