Ethernet Encapsulation

In this article we will discuss Ethernet Encapsulation, will make brief discussion on Ethernet Encapsulation, In last article we discuss about Media Access Control.

Ethernet is the most widely used LAN technology today.

Ethernet operates in the data link layer and the physical layer. It is a family of networking technologies that are defined in the IEEE 802.2 and 802.3 standards. Ethernet supports data bandwidths of:

  • 10 Mb/s
  • 100 Mb/s
  • 1000 Mb/s (1 Gb/s)
  • 10,000 Mb/s (10 Gb/s)
  • 40,000 Mb/s (40 Gb/s)
  • 100,000 Mb/s (100 Gb/s)

Ethernet standards define both the Layer 2 protocols and the Layer 1 technologies. For the Layer 2 protocols, as with all 802 IEEE standards, Ethernet relies on the two separate sublayers of the data link layer to operate, the Logical Link Control (LLC) and the MAC sublayers.

LLC sublayer

The Ethernet LLC sublayer handles the communication between the upper layers and the lower layers. This is typically between the networking software and the device hardware. The LLC sublayer takes the network protocol data, which is typically an IPv4 packet, and adds control information to help deliver the packet to the destination node. The LLC is used to communicate with the upper layers of the application, and transition the packet to the lower layers for delivery.

LLC is implemented in software, and its implementation is independent of the hardware. In a computer, the LLC can be considered the driver software for the NIC. The NIC driver is a program that interacts directly with the hardware on the NIC to pass the data between the MAC sublayer and the physical media.

MAC sublayer

MAC constitutes the lower sublayer of the data link layer. MAC is implemented by hardware, typically in the computer NIC. The specifics are listed in the IEEE 802.3 standards.

Add a Comment

Your email address will not be published. Required fields are marked *