In this article we will discuss Port Address Translation (PAT), will make brief discussion on Port Address Translation (PAT), In last article we discuss about Dynamic NAT.
Port Address Translation (PAT), also known as NAT overload, maps multiple private IPv4 addresses to a single public IPv4 address or a few addresses. This is what most home routers do.
The ISP assigns one address to the router, yet several members of the household can simultaneously access the Internet. This is the most common form of NAT.
With PAT, multiple addresses can be mapped to one or to a few addresses, because each private address is also tracked by a port number. When a device initiates a TCP/IP session, it generates a TCP or UDP source port value or a specially assigned query ID for ICMP, to uniquely identify the session. When the NAT router receives a packet from the client, it uses its source port number to uniquely identify the specific NAT translation.
PAT ensures that devices use a different TCP port number for each session with a server on the Internet. When a response comes back from the server, the source port number, which becomes the destination port number on the return trip, determines to which device the router forwards the packets. The PAT process also validates that the incoming packets were requested, thus adding a degree of security to the session.
The animation illustrates the PAT process. PAT adds unique source port numbers to the inside global address to distinguish between translations.
As R2 processes each packet, it uses a port number (1331 and 1555, in this example) to identify the device from which the packet originated. The source address (SA) is the inside local address with the TCP/IP assigned port number added. The destination address (DA) is the outside local address with the service port number added. In this example, the service port is 80, which is HTTP.
For the source address, R2 translates the inside local address to an inside global address with the port number added. The destination address is not changed, but is now referred to as the outside global IPv4 address. When the web server replies, the path is reversed.